Virtual Guru's Blog – Home of Virtualization Workshops

April 22, 2009

Home Storage OpenSolaris based Server (Check HW with Fedora 9)

Filed under: opensolaris, storage, virtualbox, Virtualization, vmware — natiku @ 2:46 am

Use Fedora 9 LiveCD for check HW capabilities

I will use a Fedora 9 LiveCD as HW diagnostic CD, because most of you will me more familiar with Linux then with OpenSolaris.

This entry is part of HW for Virtualization


First I run Memory test boot option and test memory

Second I investigate if HW is properly configured

Check if right devices are activated

lspci -nn
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev a2)
00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
00:05.0 VGA compatible controller [0300]: nVidia Corporation C51PV [GeForce 6150] [10de:0240] (rev a2)
00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a3)
00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a3)
00:0a.2 RAM memory [0500]: nVidia Corporation MCP51 Memory Controller 0 [10de:0272] (rev a3)
00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a3)
00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a3)
00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1)
00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1)
00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0267] (rev a1)
00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2)
00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a3)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology
Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]

Check then AMD Power Now! is activated

dmesg | grep powernow
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0x14 (2800 MHz), vid 0x8
powernow-k8:    1 : fid 0x12 (2600 MHz), vid 0xa
powernow-k8:    2 : fid 0x10 (2400 MHz), vid 0xc
powernow-k8:    3 : fid 0xe (2200 MHz), vid 0xe
powernow-k8:    4 : fid 0xc (2000 MHz), vid 0x10
powernow-k8:    5 : fid 0xa (1800 MHz), vid 0x10
powernow-k8:    6 : fid 0x2 (1000 MHz), vid 0x12

Check S-ata support and then drives are on S-ata II 3.0Gbit speed

dmesg | grep -i sata
sata_nv 0000:00:0e.0: version 3.5
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 22
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 22
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 21
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 21
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

Check then Net have 1Git speed (if you have 1Gbit connection)

ethtool eth0
Settings for eth0:
Supported link modes:   10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes:  10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Link detected: yes

Check if drivers are SMART capable (sda, sdb,sdc, sdd)

smartctl -i /dev/sda
smartctl version 5.38 [i386-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.10 family
Device Model:     ST3160815AS
Serial Number:    5RA6JB4J
Firmware Version: 4.AAB
User Capacity:    160,041,885,696 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed Jul 30 13:55:19 2008 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
smartctl -A /dev/sda | egrep  "ID|Temperature"
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
190 Airflow_Temperature_Cel 0x0022   057   053   045    Old_age   Always       -       43 (Lifetime Min/Max 29/43)
194 Temperature_Celsius     0x0022   043   047   000    Old_age   Always       -       43 (0 27 0 0)
smartctl -i /dev/sdb
smartctl version 5.38 [i386-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model:     MAXTOR STM3500320AS
Serial Number:    9QM2GA4H
Firmware Version: MX15
User Capacity:    500,107,862,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Wed Jul 30 13:56:24 2008 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
smartctl -A /dev/sdb | egrep  "ID|Temperature"
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
190 Airflow_Temperature_Cel 0x0022   066   060   045    Old_age   Always       -       34 (Lifetime Min/Max 26/34)
194 Temperature_Celsius     0x0022   034   040   000    Old_age   Always       -       34 (0 24 0 0)

Check CPU and Motherboard temperature infos

Install and configure lm_sensors

yum install lm_sensors
sensors-detect
Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no):
Starting lm_sensors: loading module it87 k8temp
sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:   +2.0°C
Core0 Temp:   -2.0°C
Core1 Temp:  +12.0°C
Core1 Temp:  -11.0°C
it8716-isa-0290
Adapter: ISA adapter
VCore:       +1.04 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
VDDR:        +3.18 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
+3.3V:       +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
+5V:         +4.76 V  (min =  +0.00 V, max =  +6.85 V)   ALARM
+12V:       +11.71 V  (min =  +0.00 V, max = +16.32 V)   ALARM
in5:         +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in6:         +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
5VSB:        +4.73 V  (min =  +0.00 V, max =  +6.85 V)   ALARM
VBat:        +2.88 V
fan1:       3183 RPM  (min = 3245 RPM)  ALARM
fan2:       3571 RPM  (min = 3245 RPM)
fan3:       3835 RPM  (min =    0 RPM)
temp1:       +29.0°C  (low  =  -1.0°C, high = +127.0°C)  ALARM  sensor = thermal diode
temp2:       +41.0°C  (low  =  -1.0°C, high = +127.0°C)  ALARM  sensor = transistor
temp3:       +25.0°C  (low  =  -1.0°C, high = +127.0°C)  ALARM  sensor = transistor
cpu0_vid:   +0.000 V
Advertisements

1 Comment »

  1. […] Home Storage OpenSolaris based Server (Check HW with Fedora 9) […]

    Pingback by HW for Virtualization Workshops « Virtual Guru's Blog – Home of Virtualization Workshops — February 1, 2010 @ 8:30 pm


RSS feed for comments on this post. TrackBack URI

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Create a free website or blog at WordPress.com.

%d bloggers like this: